Walker Edison Regal 4-in-1 TV Stand w. Mount - Wood Review

Average Reviews:

(More customer reviews)After spending hours looking at options for a TV stand or wall mount, I came to the decision to get a TV stand with a mount built in (because I live in an apartment). This is without a doubt the best choice in this category. It took me no more than 2 hours from the time I opened it until it was put together. The directions are pretty straightforward, even though I messed up a couple of times and had to backtrack. You can probably reduce the time it takes to build this by 50% if you have another person helping. Also, I HIGHLY recommend the 60" version over the 42" one. It is definitely worth the extra money. My 50" flat screen goes perfect with this stand.
Here are the pros:
- The parts were very well packed
- Looks sturdy, quality material. This should last me my entire lifetime...
- Simple, easy to follow directions. Everything is labeled.
- A plethora of screws/bolts for TV mounting options (your TV is almost sure to have the correct mounting screws included)
- The mount is the best mount I've ever used. The mount is made to be very easily adjustable. It tilts vertically, as well as horizontally. It will not, however, slide side-to-side (horizontally) or up and down (vertically), but the tilting options are more than enough.
- BEAUTIFUL STAND
- Plenty of space
Cons
- I've noticed dust collecting on the glass after a few days. I have a micro fiber cloth nearby now, and I'll probably have to make it a task to wipe it down real quick once a week. Not really much of a con though.
- It may take a little trial and error to get your TV on the stand at the desired height. You can eliminate the trial and error by doing some simple measuring/guesstimation though.
- Fingerprints might be a problem for people with kids.
- Might need extra washers. They gave me the exact number of washers that I needed, and I almost lost one when I dropped it.
Other things
Make sure you have plenty of space to put it together, and set aside a couple of hours to put it together. I have the TV the highest it will go (without allowing the mount to be visible) and there is about 7-8 inches from the top layer of glass to the bottom of my TV. This allows space for a quality center channel speaker to be placed directly under the TV. Lastly, if you're looking for a home theater system to go with this stand check out EMP Tek. Their Impression series speakers (in red burl color) match this stand perfectly; They will blow any mainstream brand speakers out of the water, too.
I can't really say enough about this stand. I have gotten comments on it from every last person that's seen it. I'm very happy with my purchase.

Click Here to see more reviews about: Walker Edison Regal 4-in-1 TV Stand w. Mount - Wood

Display a flat-panel plasma or LCD television on this versatile 4-in-1 TV stand with mount from Walker Edison. With four different display options, the stand adapts to the specifications of the designated viewing space and the TV in question. The TV can be mounted directly to the stand, mounted to the wall, placed on the stand, or placed on the stand while a second TV is mounted to another room's wall. The 42-inch stand boasts a 250-pound weight capacity and best suits televisions with a 42-inch screen or smaller for on-stand placement. When wall mounting, however, the stand's removable universal wall mount accommodates screens as large as 52 inches and up to 150 pounds. The wall mount provides several different height settings, and allows tilting the screen up and down 15 degrees. To obtain the best angle for viewing, the mount swivels left to right.
The TV stand's frame and mount feature strong steel construction with black powder coat finish, while a solid hardwood front adds style. For holding DVD players, video game systems, stereo components, and more, the TV stand provides three shelves, crafted in 8mm beveled tempered safety glass. The TV stand benefits from concealed cable management. The TV stand requires home assembly and comes with thorough instructions and necessary hardware. The TV stand measures 42 inches wide by 18 inches deep, with a 20-inch height without the mount and a 51-inch maximum height with the mount. Assembled, the TV stand weighs 80 pounds.

Get 59% OFF

Click here for more information about Walker Edison Regal 4-in-1 TV Stand w. Mount - Wood

Read More...

Jaguar 3 in 1 TV Stand - Cherry and Glossy Black Review

Average Reviews:

(More customer reviews)I usually don't write reviews, but this item is so great that I felt the need to spread the word. Outstanding TV stand - very attractive, it's sturdy, reasonably priced and it's super easy to set up. I'm a single female who put this piece together by myself (45 minutes to an hour give or take)..I like how the TV mount swivels side-to-side & tilts up and down. All in all, I'm happy - would highly recommend this product.Pros:
1) Well packaged
2) Easy to assemble - One man/woman job except for putting the TV onto the mount or wall.
3) Provides Cable Management.
4) Looks great.
Cons:
1) The glass shelves tend to collect dust and show finger prints.
I absolutely love it. It holds my 52'' Sharp Aquos LCD just fine.

Click Here to see more reviews about: Jaguar 3 in 1 TV Stand - Cherry and Glossy Black

This contemporary 3 in 1 television mount system features solid rubber wood legs in a warm cherry finish. Thick black tempered safety glass shelves and a glossy black metal finish rounds out the stylish lines. This unit features three unique ways to display the television: It can be used as TV stand or your flat panel can be attached to the back post mount with both tilt and swivel functions. Or if you choose the mount can be detached and secured to your wall maintaining the tilt function and utilizing our unique dual channeled cable cover. The patented mount system accommodates most LCD/Plasma TV's up to 55 inches (60 inches when mounted).

Click here for more information about Jaguar 3 in 1 TV Stand - Cherry and Glossy Black

Read More...

Z-Line Sync Flat Panel TV Stand with Integrated Mount Review

Average Reviews:

(More customer reviews)It took a long time to get this item when I selected free shipping -- about 2.5 weeks. But it did arrive before the specified arrival date. This is the largest, tallest free-standing TV mount I could find anywhere, with at least nine inches between the two glass shelves. That distance is important for across-the-top air flow if you need fans to cool your components. It does create a commanding presence in the room.
When you get the box on your porch, you will be in for a treat! But, do some preparation first. It can be assembled by one person. Haul it into the house. Now, go get the vaccuum cleaner! Don't even open the box without it at hand. The styrofoam will float. A thousand tiny grains everywhere, so vaccuum everything off as you pull it out. Else, you will find styrofoam bits forever. Initially, the directions are basically simple and extra connectors are provided so you absolutely will be putting this thing together. Every piece is numbered in sequence of assembly so you can't lose anything. If you are vaccuming, you will avoid cleaning up later. Once you have the parts out and identified decide to put the cabinent together in one process because you have to glue it all together, as well as screw it together. Its takes about 2 hours if you are being careful. Make sure you glue carefully and place the connectors precisely and the bottom cabinent construction will be tight and virtually unbreakable. There was one mis-aligned hole punched in the metal brackets for connection of the bottom of the cabinent to the frame, but this was not a problem because three out of four was quite tight enough. Putting the drawer together is important -- do it carefully -- the first time I tried to push it in I thought I had reversed the sides. But it needed a bit of force and works fine.
I put a 54 inch 85 lb TV on this stand with a 65 lb receiver on the bottom shelf and a mostly self-supported 105 lb amplifier on the other side of the bottom shelf... I think there may be between 70-90 lbs altogether on the bottom shelf. I didn't want to test it past that! I was already exceptionally pleased that it was so sturdy. Don't overload the glass shelves. I have the center channel on top (10 lbs) and the BDP and cable box on the second. The wire guides are in helpful positions and I did use one for the seven-channel analogue crossover cables to the amp. The others are for power cords, HDMI cables, and speaker cables. It does work, and it is very functional.
If there is a better mount for an audiophile set-up, I can't find it. Careful assembly is the key. Enjoy!

Click Here to see more reviews about: Z-Line Sync Flat Panel TV Stand with Integrated Mount

Display a flat-panel plasma or LCD television in style on this sturdy TV stand from the innovative minds at Z-Line Designs. Designed for 36-to-65-inch screens, the TV stand's integrated mount sustains televisions with up to a 150-pound weight capacity without requiring wall installation. The mount swivels to adjust the screen angle for optimum viewing. Finished with a sleek piano black powder coat, the TV stand features a strong metal frame. A media storage drawer at the base of the stand contains DVDs, CDs, and remotes. For holding DVD/BluRay players, video game systems, stereo components and more, two shelves of 8mm clear tempered safety glass are provided above the drawer. Chrome cylinder supports hold up the shelves securely. With the stand's open shelf design, air circulates around the electronic components to increase safety. Installed slots in the TV stand enable tidy cable management. For home assembly, the TV stand comes equipped with a universal hardware mounting kit and detailed instructions. The user can mount the screen at varying heights to best meet their personal home entertainment needs. Made in China, this item is covered by a limited lifetime warranty. The assembled TV stand measures 50 inches wide by 20-1/2 inches deep by 55 inches high.

Get 33% OFF

Click here for more information about Z-Line Sync Flat Panel TV Stand with Integrated Mount

Read More...

Z-Line Portland Flat Panel TV Stand with Integrated Mount Review

Average Reviews:

(More customer reviews)I got mine at COSTCO, not Amazon.
It looks great, matches the Black of my 50" Panasonic Plasma great along with my Left and Right speakers and stands. The Swivel mount works good. Makes it a little easier when you need to get behind your HDTV. Not a huge need to swivel with a Plasma since the viewing angle is so wide.
It's also quite a heavy stand!!! It holds a lot also. A Negative is because it's Gloss Black, it does collect a lot of dust easily.
Hanging my Plasma on the wall wasn't a option for me. I also didn't want my Plasma sitting on top of a Glass Shelf. I've seen pictures of what happens when the shelf shatters even though the Rated weight rating was much higher then the HDTV and yet still shattered. I like the look of it up in the Air. The center support blocks the view of any wires, which for me is the power cable and a single HDMI cable. It also allowed me to place the center speaker right under the center of my HDTV with it up in the Air like it is. It is adjustable Up and down, not real easily, but possible. I have mine mounted up to the second to last top hole. This allowed me to fit the speaker under the HDTV, have it at a nice viewing height which if I had just used the Stand my Plasma came with and sat it on the top shelf would have been way to LOW to view. I'm about 7 feet from my screen and even when I'm fully reclined I can still see the screen fully without even my feet blocking the screen.
I've seen other HDTV stands with these type of center lift mounts but most are pretty flimsy feeling to me. Not fully part of the stand where you can remove it and not use it if you like. Not this one. It's Part of the stand. It's bolted on. It's wide and strong. There's no give, no sway, it's solid. There's a bolt kit, with lots of different bolts to fit just about any HDTV, Plasma or LCD made to fit this stand. I popped the caps off the back of my Panasonic Plasma, Installed the 2 Brackets with the Included/Correct bolts, and lifted it onto the Stand mount, then screwed up the lock bolts to keep it from somehow being knocked off. Your HDTV isn't going anywhere!!!


Click Here to see more reviews about: Z-Line Portland Flat Panel TV Stand with Integrated Mount

Portland flat panel TV stand with Integrated mount.

Get 38% OFF

Click here for more information about Z-Line Portland Flat Panel TV Stand with Integrated Mount

Read More...

Z-Line Vitoria Flat Panel TV Stand Review

Average Reviews:

(More customer reviews)I was ready to buy this stand from Amazon and guess what? I ran into it at Wal-mart for $159. It comes in a
different box labeled Home Trends, the glass shelves are clear / not black but everything else is the same.
The instructions are labeled Z-line - yep, it's the real thing. All the other positive things said in other
reviews are true. BTW - it handled my new 65 inch Sharp LCD just fine. Only assembly problem was "bottom pad"
screw holes - needed to run a drill bit through as the screw holes didn't exactly line up. That's my story
and I'm stickin to it.

Click Here to see more reviews about: Z-Line Vitoria Flat Panel TV Stand

Mount a flat-panel plasma or LCD television in style on this attractive, sturdy TV stand from the innovative minds at Z-Line Designs. Designed for 60-inch screens or smaller, the TV stand's integrated mount sustains televisions with up to a 150-pound weight capacity. The TV stand features a strong metal frame with black powder coat finish. Users can adjust the angle of the screen for optimum viewing with the stand's swivel mount. For holding DVD/BluRay players, video game systems, stereo, and more, the TV stand provides three shelves. The shelves' open air design allows air to circulate around the electronic components to increase safety. Crafted in 8mm and 6mm black tempered safety glass, chrome cylinder supports endow the shelves with extra stability. Installed slots in the TV stand enable tidy cable management. For home assembly, the TV stand comes equipped with a universal hardware mounting kit and detailed instructions. The user can mount the screen at varying heights to best meet their personal home entertainment needs. Made in China, this item is covered by a limited lifetime warranty. The assembled TV stand measures 44 inches wide by 21-1/4 inches deep by 50 inches high and weighs 101-3/4 pounds.

Get 36% OFF

Click here for more information about Z-Line Vitoria Flat Panel TV Stand

Read More...